A gas furnace or water heater vents combustion gases up a flue. If the house or the furnace room is depressurized, those gases can spill back indoors. A badly restricted filter doesn't usually cause backdrafting by itself, but it is one of several things that change pressures and airflow, so keep filters clean and have combustion appliances checked.
What backdrafting is
Natural-draft gas appliances rely on hot flue gases rising up the chimney. Strong exhaust fans, a clothes dryer, a fireplace or leaky return ducts in the furnace room can pull air down the flue instead, spilling exhaust, including carbon monoxide, into the home.
Where filters fit in
A clogged or overly restrictive filter reduces airflow across the heat exchanger, which can make a furnace overheat and cycle on its high-limit switch. Return-side leaks near the furnace, made worse by a restricted filter, can lower pressure in the furnace room.
- Change filters on schedule and use a grade the system handles
- Seal return duct leaks in the furnace room
- Give the furnace room enough combustion air
Protecting your home
Ask a heating technician to do a combustion safety test (worst-case depressurization and a spillage check) at annual service, especially after adding a big exhaust fan or tightening the house.


