Guide

True HEPA vs. HEPA-Type vs. H13: Decoding Air Filtration Standards

Differentiate DOE True HEPA (99.97% @ 0.3 microns), European EN 1822 H13/H14 grades, and deceptive uncertified 'HEPA-Type' marketing claims.

By ClariSelect Editorial · Updated October 2026

The short answer

The High-Efficiency Particulate Air (HEPA) standard was developed during World War II by chemical defense researchers to trap radioactive particles. Under the U.S. Department of Energy (DOE) standard (DOE-STD-3020), an authentic HEPA filter must capture at least 99.97% of airborne particles measuring exactly 0.3 microns in diameter.

The Origins of the HEPA Standard

The High-Efficiency Particulate Air (HEPA) standard was developed during World War II by chemical defense researchers to trap radioactive particles. Under the U.S. Department of Energy (DOE) standard (DOE-STD-3020), an authentic HEPA filter must capture at least 99.97% of airborne particles measuring exactly 0.3 microns in diameter.

Why the 0.3 Micron Benchmark Matters

Many consumers mistakenly believe that particles smaller than 0.3 microns are harder to catch. In aerosol physics, particles smaller than 0.1 microns move via chaotic Brownian motion, causing them to collide with and adhere to filter fibers readily through diffusion. Particles larger than 0.5 microns are captured easily by impaction and interception. The 0.3 micron size is the Most Penetrating Particle Size (MPPS); if a filter stops 99.97% of 0.3-micron particles, its efficiency on smaller and larger particles is even higher.

Classification Breakdown: HEPA Tiers

Classification Breakdown: HEPA Tiers
DesignationStandardEfficiency @ MPPSStatus & Verification
True HEPAU.S. DOE / Mil-Std≥ 99.97% @ 0.3 μmLegitimate laboratory rated benchmark
H13 high-gradeEN 1822 (European)≥ 99.95% @ MPPSStrict European standardized grade
H14 high-gradeEN 1822 (European)≥ 99.995% @ MPPSHospital cleanroom & pharmaceutical grade
'HEPA-Type' / 'HEPA-Like'None (Marketing term)85% – 95% (Variable)Unregulated; often fails sub-micron capture

Regulatory Scrutiny of H13 Claims

In recent years, regulatory bodies including the National Advertising Division (NAD) have scrutinized consumer air purifier manufacturers for advertising 'high-grade H13 True HEPA' without providing full-unit mechanical leak testing. While the flat sheet media may test to H13 specifications, air bypassing plastic housing seams can reduce overall unit filtration below 99.97%. Always look for sealed gasketed designs.

Products mentioned