- Qualifies if
- A pleated filter line that stocks 14x25x1 as its own listing.
- Ranked by
- MERV rating (highest first)
- Shown
- The top 8 of 13 products in our catalog that meet the rule.
Filterbuy Smoke & Allergy Defense MERV 13 Air Filter
MERV 13 (MPR 1900). Actual size of the 14x25x1: 13.5 x 24.5 x 0.75 in. The 14x25x1 listing sells a 4-pack. Highest grade here; check your system handles MERV 13 in this depth.
Filtrete MPR 1900 (MERV 13) Air Filter
MERV 13 (MPR 1900). Actual size of the 14x25x1: 13.5 x 24.5 x 0.75 in. Highest grade here; check your system handles MERV 13 in this depth.
Nordic Pure Pleated MERV 13 Air Filter
MERV 13 (MPR 2200). Actual size of the 14x25x1: 13.5 x 24.5 x 0.75 in. The 14x25x1 listing sells a 6-pack. Sold in 14x25x1 on Amazon and Nordic Pure. Highest grade here; check your system handles MERV 13 in this depth.
Filtrete MPR 1500 (MERV 12) Air Filter
MERV 12 (MPR 1500). Actual size of the 14x25x1: 13.5 x 24.5 x 0.75 in. Allergy grade for pollen, dander and mold spores.
Nordic Pure Pleated MERV 12 Air Filter
MERV 12 (MPR 1500). Actual size of the 14x25x1: 13.5 x 24.5 x 0.75 in. Sold in 14x25x1 direct from Nordic Pure. Allergy grade for pollen, dander and mold spores.
Filterbuy Pet & Allergy Defense MERV 11 Air Filter
MERV 11. Actual size of the 14x25x1: 13.5 x 24.5 x 0.75 in. Allergy grade for pollen, dander and mold spores.
Filtrete MPR 1000 (MERV 11) Air Filter
MERV 11 (MPR 1000). Actual size of the 14x25x1: 13.5 x 24.5 x 0.75 in. Allergy grade for pollen, dander and mold spores.
BNX TruFilter MERV 11 Air Filter
MERV 11 (MPR 1000). Allergy grade for pollen, dander and mold spores.
How to choose between them
A 14x25x1 filter fits a return grille or the filter slot beside the furnace. 8 filter lines we cover stock the 14x25x1 as its own listing, and each pick below links to that exact size, not the line's best-known size. At this depth most homes change the filter every one to three months.
A 14x25x1 filter has a face of about 350 square inches (2.43 sq ft). At the roughly 300 ft/min face velocity commonly used to size 1-inch filters, that passes about 729 CFM, which suits a system of about 2 tons at 400 CFM per ton. If your system is larger than that, a single filter this size will run at higher velocity and resistance; homes in that position often use two returns or a deeper filter cabinet.
Actual frame sizes differ slightly by brand: 13.5 x 24.5 x 0.75 in. Measure the old filter's frame (or the slot) and match the printed size; a filter that is too small lets air bypass the media.
Pick the grade for your home: MERV 8 for dust and equipment protection, MERV 11 or 12 for allergies and pets, MERV 13 for smoke and fine particles. In a 1-inch frame, MERV 13 adds noticeable resistance; if the system whistles or the filter bows, step down a grade.
Close sizes people mix up with this one: 14x14x1, 14x20x1, 14x30x1, 16x25x1, 16x25x2, 16x25x4, 16x25x5, 20x25x1. Measure before you order; a half-inch difference leaves a gap air will bypass.
Rankings follow the rule and order stated above, using makers' published specifications and listed prices. How we research · Disclosure







